Beverage Air Kegerator – 8 Faucets

Install this 8 faucet kegerator in your store and watch your bottom line get a healthy boost as craft beer lovers enjoy a great selection.

The exterior of the filling station is coated with black wear-resistant vinyl on steel for a perfect combination of durability and elegance. The stainless steel top is mounted with two draft towers that come complete with four pre-installed draft beer faucets apiece. A bar drip tray comes standard to ensure easy cleaning from any pouring mishaps.

The inside of the massive kegerator fridge features galvanized steel walls and ceilings with room for up to 10 1/6 kegs or three 1/4 or 1/2 (full kegs). The reinforced floor and self-closing door with keyed lock are made from heavy-duty stainless steel, and magnetic gaskets along the door’s lip ensure a strong, frost-saving seal.

Foamed-in-place polyurethane insulation provides maximum cooling efficiency and adds an extra degree of strength to the durable cabinet. The lift-out heavy duty forced-air refrigeration system uses CFC-free R134a refrigerant to create a steady flow of cold air and provide fast, uniform recovery and cooling of your system.

This double tower kegerator kit also includes all the components you need for pouring out 8 draft beers from the same unit. It includes two four tap towers, a 10-lb CO2 air tank, a whopping 8 Sankey couplers, two 4-way secondary CO2 regulators, brass faucets, and beer and air lines for each of the 8 taps.

With the ability to offer up to 8 beers from this growler tap station from an efficiently-cooled draft system from fridge to each kegerator tower, your customers will walk away pleased.

Please note: If this configuration does not meet your needs call our draft beer equipment sales department at 866.881.BEER (2337) or e-mail your request to

• Sleek, black exterior coated with wear-resistant vinyl on steel
• Cabinet is insulated with foamed-in-place polyurethane
• Refrigerant used is R134a, which is CFC-free
• Galvanized steel interior
• Top is made from heavy-duty stainless steel
• Will hold 10 to 12 sixth kegs, 3 quarter keg or 3 half kegs
• Knock out plug on compressor housing can be removed to run CO2 line into unit from external tank
• CO2 tank can be stored inside unit, but will take the place of at least one sixth keg

• External dimensions: 59″W x 37 1/4“H x 28 3/16“D
• Depth with door open: 50 9/16“
• Net Capacity: 23.8 Cu Ft.
• 115 volts, 7.2 amps, 1/3 HP
• Unit pre-wired with 8’ long cord and plug set