Double Pedestal Draft Beer Tower – Stainless Steel – 4″ Column – Glycol Cooled – 8 To 20 Faucets

With the heavy-duty Double Pedestal Draft Beer Tower, you can serve up to 20 different beers and never have to worry about pouring performance. Its compatibility with a glycol cooling system gives it maximum cooling performance.

This commercial H-style draft tower has an air-tight design and is constructed from durable 16-gauge stainless steel, so you know it’s made for heavy use and easy maintenance. A brushed satin finish ensures this tower will stand out and look amazing in your bar.

The Double Pedestal Draft Beer Tower comes with your choice of 8, 10, 12, 14, 16, 18, or 20 faucets. Each faucet is made from premium chrome with brass stems, and comes with an attached hose.

This draft tower is designed for glycol cooling and is ready to hook up to your glycol chilling unit. The pre-installed copper glycol loops directly contact the top and bottom of the shanks. Plus, the loops offset from box front for outstanding cold retention without condensation. The eight-faucet tower is built with two recirculation glycol lines, while the 10-20 faucet models come with four lines.

For the majority of long draw or commercial draft beer systems, especially those running 6 or more beer lines or draft systems running over 15 feet, a is recommended. This system implements a separate chiller that uses the power of glycol to move beer further distances, while still keeping it cold from keg to tap. Propylene glycol, a non-toxic, food-grade antifreeze, is the main component that’s been used for many years in food-processing systems.

When assembled on your bar, this double pedestal draft beer tower is 17 inches tall. Depending on how many faucets you order, the length is between 25 and 61 inches.

Inside the unit, there’s a½-inch insulation in the box. Beer and glycol lines are split with half of each running down each pedestal.

For your convenience, your draft beer tower comes fully assembled. All necessary mounting screws and hex nuts are included.

• H-style double pedestal draft beer tower with 8, 10, 12, 14, 16, 18, or 20 faucets
• Serve up to 20 different beers at your home or commercial bar
• Made from heavy-duty stainless steel with brushed satin finish
• Premium chrome faucets with brass stems
• Air-tight construction
• Designed for glycol cooling
• Copper glycol loops (pre-installed) come in direct contact with the shanks (top and bottom)
• Loops offset from box front for exceptional cold retention without condensation
• Can be mounted on bar or counter top
• ½-in. insulation in tower and beer lines
• Specially machined ¼ in. bore shanks with built-in tail pieces
• Comes with beer lines and installation hardware
• No mounting gasket needed for installation

• 4″ pedestal tubes
• Tower Box Dimensions: 7″D x 5″H
• Total height of Assembled Tower: 17″
• Faucet Span: 3″
• Tip of Faucet to Base: 13″
• Box Length
• 8 faucets 25″
• 10 faucets 31″
• 12 faucets 37″
• 14 faucets 43″
• 16 faucets 49″
• 18 faucets 55″
• 20 faucets 61″
• Center to Center of Pedestals
• 8 faucets 12.5″
• 10 faucets 15.5″
• 12 faucets 18.5″
• 14 faucets 21″
• 16 faucets 27″
• 18 faucets 33″
• 20 faucets 39″
• 8 Faucet Glycol Towers are built with 2 recirculation glycol lines
• 10 – 20 Faucet Glycol Towers are built with 4 recirculation glycol lines
• Free Custom Pedestal Spacing available upon request. Please call for more information