Single Faucet Jockey Box – 70′ Coil – Faucet Hardware Kit

Whether you’re setting up for an event or just want to get a better dispensing system for your next party, this beer jockey box kit is a big step up from your standard keg.

This 48 quart cooler has a fully-functional draft beer faucet and shank pre-assembled in its side. The included 70-foot stainless steel jockey box coil should be kept in an ice bath to provide an ultimate refreshing experience with each effortless pour. Since the coils are made of stainless steel, they will not corrode over time if maintained and cleaned properly.

Perfect for one-day parties or catered affairs, jockey boxes are a dream come true for anyone looking for a way to set their event apart. To fully connect your jockey box, you’ll also need a keg, beer line, a CO2 tank, a CO2 regulator, and a you’ll be serving.

This jockey box kit includes a 48-qt cooler, a 70-ft stainless steel coil of 5/16″ outside diameter, a 3″ beer shank attached to the front of the jockey box, a 3″ cooler coupling attached to the back, and one chrome-plated draft beer faucet on the front with a tap handle faucet knob attached to it. It also includes 6 total fittings: a hex nut, ferrule, and rubber grommet on either side of the coils for easy attachment.

To use, make an ice bath for the coils of ice cubes and water. Set up your jockey box no more than 10 feet from your ice cold keg. Attach the beer line from the top of the keg coupler to the cooler coupling, and the air line from the outlet barb on the CO2 regulator to other side of the coupler. Adjust the keg regulator to 40-60 PSI based on your setup. Keep both the jockey box coils and keg cold throughout to avoid foaming (no more than 40° F).

Be sure to wash out your lines and coils after each use, just as you would normally . Check out our for more information on completing your setup.

Please note: This listing is for the cooler, faucet assembly, and stainless coil only. For more complete single-tap jockey box solutions, check out the or .

• Perfect for easy dispensing at parties or events
• Faucet and shank come pre-assembled into side
• Stainless steel coil keeps beer cold and will not corrode over time
• Extra long 70-foot coils made for maximum cooling of beer
• Drain for easy disposal of water
• Built with Coleman coolers & leak proof hardware
• , , , , and sold separately

• Cooler Dimensions: 24″ W x 15″ H x 14″ D
• Cooler Capacity: 48 Qt
• Overall Coil Dimensions: 9.5″ H x 5.25″ W
• Coil Dimensions: 70′ L x 5/16″ OD